Consew P1541S-CC
Industrial single-needle compound-feed walking-foot lockstitch machine
Consew specifies needle system 135x17 and M pre-wound bobbins for the P1541S-CC.
Verified compatibility
1 verified relationships.
| Part or system | Relationship | Status | Evidence note |
|---|---|---|---|
| Needle System 135x17 | Officially compatible | CONFIRMED | Consew specifies needle system 135x17 and M pre-wound bobbins for the P1541S-CC. |
Manuals
Verified official manuals matched to this exact machine record.
Machine specifications
- Feed
- Walking foot
- Feed mechanism
- Drop feed, needle feed and walking foot
- Maximum sewing speed
- CONFLICTED: current product page says 2,800 SPM, official manual says 2,000 SPM
CONFLICTED - Maximum stitch length
- 9 mm
- Needle system
- 135x17, manual also labels DP*17
- Pre-wound bobbin
- M
- Workspace
- 260 x 100 mm / 10-1/4 x 3-15/16 in
- Presser-foot lift
- 9 mm by hand, 16 mm by knee
- Needle-bar stroke
- 36 mm
- Safety clutch
- Barrel-type slip-bearing safety clutch
About this machine
The Consew P1541S-CC is a Premier Series industrial lockstitch machine with drop feed, needle feed and walking-foot feed. Consew's current product page specifies a 135x17 needle system, M pre-wound bobbin, 9 mm maximum stitch length and 260 x 100 mm workspace.
Consew publishes two different maximum-speed figures
The current P1541S-CC product page says 2,800 stitches per minute. The official P1541S-CC manual lists 2,000 stitches per minute in its main specifications. Both are Consew sources for the exact model.
The lubrication wording also changed
The current product page calls the system automatic lubrication and describes an automatically oiled horizontal hook. The manual uses the broader term semi-lubrication and gives daily lubrication instructions. That may reflect documentation wording or a revision, but the available sources do not establish a clean version boundary.
The stable fields are still useful
The same sources agree on the model's medium-heavy compound-feed purpose, 9 mm maximum stitch length, 36 mm needle-bar stroke and 9 mm hand or 16 mm knee presser lift.
What this machine is used for
- Upholstery
- Heavy materials
- car-seat work
- sofa upholstery
- tarpaulins
- tents
- bags
- medium and heavy materials
Sources and scope
Compatibility is limited to facts confirmed on the official manufacturer product page.
- Consew P1541S-CC Consew · Official machine or accessory product page · Tier 2
- Consew instruction manual Consew · Instruction manual · Tier 2
- Consew instruction manual Consew · Instruction manual · Tier 2
Catalog source-link check completed September 2026. This maintenance check did not reverify every factual claim. See how factual verification differs from maintenance checks.